# Hand-Painted Marble Dust Matki Jhula for Laddu Gopal, 12 in > Hand-painted marble dust matki jhula on brass chains, a 12-inch swing with an empty seat, cut for your own Laddu Gopal murti. **Source:** https://www.tilakmandirwala.com/products/hand-painted-marble-dust-laddu-gopal-matki-jhula-12in **Business:** Tilak Mandirwala — made-to-order marble temples (mandirs), statues and decorative handicrafts. Jaipur, Rajasthan, India. Founded 2006. **How it works:** Each piece is carved to order by the independent master sculptors TMW works with in Jaipur's Khajane Walon Ka Rasta sculptors' market. TMW designs the piece with the customer, briefs the sculptor, and follows it through to delivery and installation. **Pricing:** request-for-quote — pieces are custom, so the site carries no list prices. **Ships:** across India; export enquiries welcome. **About the image:** a design visualisation, not a photograph of stock on hand. The piece is carved to order after the design is agreed. **Availability:** made to order. ## The swing, and why the seat is empty A jhula is the small swing a Laddu Gopal is seated in at home, and this one arrives with its seat deliberately bare. The seat is shaped as a matki, the round-bellied pot of the Krishna stories, set mouth-upward so the hollow forms an open cradle. Nothing is carved into it. Nothing comes fixed inside. That is the whole point of the piece: most jhulas on the market are sold with a figure already worked into the seat, which leaves no room for the murti a family already keeps, bathes and dresses. Here the cavity is cut for a Laddu Gopal of roughly three to four inches, so your own murti goes straight in, lifts out for its bath and its clothes, and goes back. ## Marble dust, brass and hand-painting The frame is cast in marble dust composite, crushed marble bound with resin and then hand-finished. It is the budget-tier alternative to quarried stone in the Jaipur workshops, and it suits a small piece like this one: fine, even and vein-free, so it takes paint far more predictably than a veined block would. The two turned posts, the arched crossbar and the stepped base are all worked from it, then hand-painted in cobalt blue and gold. A floral band runs around the belly of the pot, scrollwork drops down the posts, and a peacock feather sits at the centre of the arch. The pot hangs from slim brass chains, sourced and fitted rather than made here, and the underside of the base is lined with felt. ## Where it sits in the house At 12 inches this is a shelf and mandir piece rather than a floor one. It works on the middle tier of a home mandir, with the swing at about eye level when you are seated, or on a console in a pooja room where the pot can be reached and set moving by hand. Around Janmashtami it becomes the centre of the arrangement: the murti bathed, dressed and lowered into the pot, with flowers and a diya set out on the base step around it. Leave a hand's width of clearance either side of the posts so the pot can swing without knocking them. The felt lining means it can be lifted down and carried to a thali without marking a wooden shelf. ## Sizing it, and changing it The piece stands 12 inches to the tips of the finials, and the seat is cut for a three- to four-inch murti, which is the size most families keep. If your Laddu Gopal is larger, the whole frame scales with it: seat opening, post spacing and chain drop all move together, so tell us the height of the murti rather than the height of the jhula and the proportions come out right. The painted palette is not fixed either. Cobalt and gold is the common Krishna palette, but the same frame is worked in green and gold, in maroon, or left plain white with only the gold banding. On the arch, a lotus or a bansuri can replace the peacock feather. ## Specifications - **Material:** Marble Dust Composite - **Finish:** Hand-painted (polychrome) - **Colour:** White with blue and gold - **Weight:** 4 kg - **Ideal for:** Home mandir, Pooja room, Janmashtami Stone, size and finish are all changeable — these are the specifications of the piece as shown. ## Media ### Images (1) - https://vptrobfqdvauunfvodxw.supabase.co/storage/v1/object/public/tmw-media-assets/Statue%20product%20images/hand-painted-marble-dust-laddu-gopal-matki-jhula-12in.webp (primary, concept render) All media is public and CORS-open — fetch directly, no signing or proxy needed. ## Part of - [Handicrafts](https://www.tilakmandirwala.com/collections/custom-marble-handicraft-items) ## Related pieces - [Marble Dust Compact Bal Gopal Jhula for Home Mandir, 12 in](https://www.tilakmandirwala.com/products/marble-dust-compact-bal-gopal-jhula-12in) - [Marble Dust Compact Jhula for Laddu Gopal No. 0 to 2, 9 in](https://www.tilakmandirwala.com/products/marble-dust-compact-laddu-gopal-jhula-9in) - [Hand-Painted Marble Radha Krishna on Jhula (Decor Swing)](https://www.tilakmandirwala.com/products/hand-painted-marble-radha-krishna-on-jhula-decor-swing) ## Enquire about this piece - WhatsApp, message pre-written: https://api.whatsapp.com/send?phone=919766532408&text=Hi!%20I'd%20like%20a%20quote%20to%20have%20this%20design%20made%3A%20Hand-Painted%20Marble%20Dust%20Matki%20Jhula%20for%20Laddu%20Gopal%2C%2012%20in.%20Product%20link%3A%20https%3A%2F%2Fwww.tilakmandirwala.com%2Fproducts%2Fhand-painted-marble-dust-laddu-gopal-matki-jhula-12in - Tell us the size, the stone and where it is going. We will send you a quote and a timeline. ## Contact Tilak Mandirwala - Email: info@tilakmandirwala.com - Phone: +91 92141 72150 - WhatsApp: https://wa.me/919766532408 - Enquiry form: https://www.tilakmandirwala.com/contact - Store: Jaipur, Rajasthan, India — https://www.tilakmandirwala.com/best-mandir-shop-jaipur Enquiries are quoted per piece: share the deity or object, an approximate height, and the stone you have in mind.