# Makrana White Marble Jain Derasar, Three Gokhla with Parchin Kari Inlay — 36 in > Master-carved Makrana marble Jain ghar derasar: a 36-inch three-gokhla shrine with parchin kari inlay and a carved ashtamangal lintel. **Source:** https://www.tilakmandirwala.com/products/makrana-white-marble-jain-derasar-three-gokhla-parchin-kari-36in **Business:** Tilak Mandirwala — made-to-order marble temples (mandirs), statues and decorative handicrafts. Jaipur, Rajasthan, India. Founded 2006. **How it works:** Each piece is carved to order by the independent master sculptors TMW works with in Jaipur's Khajane Walon Ka Rasta sculptors' market. TMW designs the piece with the customer, briefs the sculptor, and follows it through to delivery and installation. **Pricing:** request-for-quote — pieces are custom, so the site carries no list prices. **Ships:** across India; export enquiries welcome. **About the image:** a design visualisation, not a photograph of stock on hand. The piece is carved to order after the design is agreed. **Availability:** made to order. ## Makrana marble, and why a derasar is carved from it Makrana is the stone the Jain temple tradition has leaned on for six centuries, from the same quarries north-west of Jaipur that supplied the Dilwara group at Mount Abu and, later, the Taj Mahal. It is a dense calcitic marble with a fine, lightly sugary crystal, and the two qualities that matter to a ghar derasar are hardness and stability. Hardness is what lets a sculptor cut the undercut foliage of a cusped arch and the thin ribs of a shikhar spire without the stone crumbling at the edge. Stability is what keeps a 36-inch shrine true through decades of daily abhishek and prakshal water. The tone is a bright natural white with only the faintest cream warmth, honed to a soft matte here rather than mirror-polished, so the carving reads through shadow instead of disappearing into glare. ## The three-gokhla plan Three niches is the canonical family derasar layout: a wide mulnayak gokhla at the middle, where the principal Tirthankar is installed, flanked by two narrower gokhla for the attendant murtis. Nothing about the plan is decorative. It is how a Shvetambar Murtipujak household actually installs, and it is why a family that already owns three murtis has nowhere to put them in a single-niche mandir. The gabhara closes behind two hinged carved doors on brass pins, shown here standing open. Each door panel carries its own inlay field, so the shrine reads as ornament whether it is open for darshan or closed overnight. A shallow prakshal channel is cut into the sanctum floor and falls to a small outlet, so the morning ablution drains instead of pooling against the murti's pedestal. ## The inlay and the symbol program The coloured-stone work is parchin kari, the Agra and Jaipur pietra dura tradition in which lapis, carnelian, malachite and jasper are cut to shape and set flush into channels chiselled out of the marble, not painted on. It runs the door panels, the arch spandrels and a continuous band across the stepped plinth, in a restrained floral vine rather than a dense field, so it lifts the white without competing with it. Above the doors the lintel carries a carved frieze of the ashtamangal (the swastika with its three dots and crescent siddhashila, the shrivatsa, the nandyavarta, the paired fish, the mirror, the water-pot, the throne and the powder-vase), and a circular siddhachakra medallion sits at the centre. The iconography is strictly Jain throughout; there is no Hindu figure, emblem or vahana anywhere on the piece. ## Installing it in a pooja room At 36 inches tall and roughly 24 inches wide the shrine reads as a proper derasar rather than a cabinet-top mandir, and it wants a dedicated pooja room or a deep alcove. Allow a clear foot on each side so the doors swing fully open and the side gokhla stay visible. It is best set on its own low wooden or marble platform at a height where a seated devotee's eye meets the mulnayak; standing the piece directly on the floor puts the sanctum below eye level. The stone alone runs to about 55 kg, so a platform needs a solid base rather than a hollow console. A warm, low LED strip tucked behind the lintel lights the niches without throwing a colour cast onto the white. ## Sizing and detail changes A derasar of this plan is made to a family's murtis rather than to a catalogue line, so the mulnayak niche can be widened or the shrine rescaled to sit in a particular alcove. The inlay palette can be taken warmer or cooler, the shikhar simplified to a single spire, the doors specified with a lock, and a family name or a pratishtha date engraved on the plinth. The sculptors this is placed with in Jaipur work to drawing, and a commission of this scale usually runs eight to twelve weeks before it is crated. Send the alcove dimensions and the heights of the murtis going into it and the plan can be drawn around them. ## Specifications - **Material:** Makrana White Marble - **Finish:** Matte (honed) - **Colour:** Natural White - **Height:** 36 inches - **Width:** 24 inches - **Depth:** 12 inches - **Weight:** 55 kg - **Ideal for:** Family ghar derasar, Dedicated pooja room, Three-murti installation Stone, size and finish are all changeable — these are the specifications of the piece as shown. ## Media ### Images (1) - https://vptrobfqdvauunfvodxw.supabase.co/storage/v1/object/public/tmw-media-assets/Statue%20product%20images/makrana-white-marble-jain-derasar-three-gokhla-parchin-kari-36in.webp (primary, concept render) All media is public and CORS-open — fetch directly, no signing or proxy needed. ## Part of - [Temples](https://www.tilakmandirwala.com/collections/custom-marble-temples) ## Related pieces - [Makrana White Marble Jain Derasar with Backlit Jali Panels — 48 in](https://www.tilakmandirwala.com/products/makrana-white-marble-jain-derasar-jali-backlit-48in) - [Hand-Painted Makrana White Marble Jain Ghar Derasar — 21 in](https://www.tilakmandirwala.com/products/makrana-white-marble-hand-painted-jain-ghar-derasar-21in) - [Makrana White Marble Jain Derasar, Silver-Clad Doors with Chovis Tirthankar Frieze — 42 in](https://www.tilakmandirwala.com/products/makrana-white-marble-jain-derasar-silver-doors-chovis-frieze-42in) ## Enquire about this piece - WhatsApp, message pre-written: https://api.whatsapp.com/send?phone=919766532408&text=Hi!%20I'd%20like%20a%20quote%20to%20have%20this%20design%20made%3A%20Makrana%20White%20Marble%20Jain%20Derasar%2C%20Three%20Gokhla%20with%20Parchin%20Kari%20Inlay%20%E2%80%94%2036%20in.%20Product%20link%3A%20https%3A%2F%2Fwww.tilakmandirwala.com%2Fproducts%2Fmakrana-white-marble-jain-derasar-three-gokhla-parchin-kari-36in - Tell us the size, the stone and where it is going. We will send you a quote and a timeline. ## Contact Tilak Mandirwala - Email: info@tilakmandirwala.com - Phone: +91 92141 72150 - WhatsApp: https://wa.me/919766532408 - Enquiry form: https://www.tilakmandirwala.com/contact - Store: Jaipur, Rajasthan, India — https://www.tilakmandirwala.com/best-mandir-shop-jaipur Enquiries are quoted per piece: share the deity or object, an approximate height, and the stone you have in mind.