# Makrana White Marble Kalash-Top Jhula with Pietra Dura Inlay, 16 in > Hand-carved Makrana marble jhula with a kalash crown and pietra dura inlay, 16 inches tall, with the seat left empty for your own murti. **Source:** https://www.tilakmandirwala.com/products/makrana-white-marble-laddu-gopal-jhula-inlay-16in **Business:** Tilak Mandirwala — made-to-order marble temples (mandirs), statues and decorative handicrafts. Jaipur, Rajasthan, India. Founded 2006. **How it works:** Each piece is carved to order by the independent master sculptors TMW works with in Jaipur's Khajane Walon Ka Rasta sculptors' market. TMW designs the piece with the customer, briefs the sculptor, and follows it through to delivery and installation. **Pricing:** request-for-quote — pieces are custom, so the site carries no list prices. **Ships:** across India; export enquiries welcome. **About the image:** a design visualisation, not a photograph of stock on hand. The piece is carved to order after the design is agreed. **Availability:** made to order. ## The stone Makrana marble comes out of the quarries in Nagaur district, Rajasthan, the stone that faces the Taj Mahal and a good deal of Rajasthan's temple architecture besides. It is a dense, fine-grained calcite marble with a bright natural white body and faint grey hairline veins drifting through it, and it holds a satin polish that stays warm under a lamp rather than turning glassy. On a piece this small the density matters more than it appears to: the turned side posts, the cusped arch and the pierced railing along the seat front are all thin sections, and a softer or coarser stone would chip at those edges within a season of handling. The surface here is finished to a soft satin polish, worked by hand so the carved faces keep a little tooth while the flat panels read smooth. ## The kalash crown and the carved frame The jhula stands on a stepped rectangular plinth, with two turned posts rising to a carved crossbeam. Above the beam sits a scalloped cusped arch, the multifoil profile found over temple doorways across Rajasthan and Gujarat, and the whole frame is topped by a kalash finial, the pot-and-lotus form that crowns a shikhara and marks this as a shrine object rather than a decorative swing. Foliate scrollwork runs along the beam and down the outer faces of the posts. The seat hangs from slender brass chains, sourced and fitted rather than worked in stone, so it swings the way a jhula is meant to when someone in the house sets it moving on Janmashtami night. ## The pietra dura inlay The colour comes from parchin kari, the stone-inlay craft Mughal workshops carried into Agra and Jaipur in the seventeenth century and that Rajasthani inlay families have kept alive since. Shaped slivers of lapis, malachite, carnelian and mother-of-pearl are set into channels cut in the marble, then ground flush so the finished surface stays level to the hand. A single floral roundel fills the arched back panel, an eight-petal rosette at its centre with blue lotus heads at the compass points. A running vine of the same stones crosses the seat apron below. Under a lamp the lapis reads a deep blue and the malachite a true green. This is mineral colour, not paint, so it will not fade or lift with cleaning. ## An empty seat, by design Most marble jhulas arrive with the infant already carved into them, cut from the same block. This one does not. The seat is a bare carved platform and it is meant to stay that way until you set your own Laddu Gopal into it: the murti a household already has, already dresses, already feeds. The seat is sized for a 5 to 6 inch murti, with a pierced railing on three sides to keep it steady, and the cavity is open so a poshak and its ornaments clear the edges rather than being pressed against them. That makes the jhula an accessory to a family's existing puja rather than a substitute for it, which is how a jhula is actually used at Janmashtami. ## Sizing it for a home mandir At 16 inches tall and roughly 13 inches across, the piece sits on a mandir shelf, a console beside one, or the floor of a puja alcove, and it wants about a foot of clear height above the finial so the kalash is not crowded by whatever sits over it. Marble is a still material and a jhula is a moving one, so give it a level surface; an uneven shelf lets the seat swing off-axis and knock against the posts. Wipe it with a dry or barely damp cloth. Keep lamp oil, flower water and any acidic cleaner off the inlay, since acid dulls the polish and etches the softer stones. Other heights, a plain uninlaid frame, or a different inlay palette can be made to your brief. ## Specifications - **Material:** Makrana White Marble - **Finish:** Soft polish (satin) - **Colour:** Natural White - **Height:** 16 inches - **Weight:** 12 kg - **Ideal for:** Home mandir, Pooja room, Janmashtami Stone, size and finish are all changeable — these are the specifications of the piece as shown. ## Media ### Images (1) - https://vptrobfqdvauunfvodxw.supabase.co/storage/v1/object/public/tmw-media-assets/Statue%20product%20images/makrana-white-marble-laddu-gopal-jhula-inlay-16in.webp (primary, concept render) All media is public and CORS-open — fetch directly, no signing or proxy needed. ## Part of - [Handicrafts](https://www.tilakmandirwala.com/collections/custom-marble-handicraft-items) ## Related pieces - [Makrana White Marble Bal Gopal on Carved Jhula with Pavilion, 18 in](https://www.tilakmandirwala.com/products/makrana-white-marble-bal-gopal-jhula-pavilion-18in) - [Makrana White Marble Jhula for Laddu Gopal with Pillared Pavilion, 18 in](https://www.tilakmandirwala.com/products/makrana-white-marble-laddu-gopal-jhula-pavilion-18in) - [Makrana White Marble Temple-Scale Jhula for Laddu Gopal No. 9 to 12, 24 in](https://www.tilakmandirwala.com/products/makrana-white-marble-laddu-gopal-jhula-temple-scale-24in) ## Enquire about this piece - WhatsApp, message pre-written: https://api.whatsapp.com/send?phone=919766532408&text=Hi!%20I'd%20like%20a%20quote%20to%20have%20this%20design%20made%3A%20Makrana%20White%20Marble%20Kalash-Top%20Jhula%20with%20Pietra%20Dura%20Inlay%2C%2016%20in.%20Product%20link%3A%20https%3A%2F%2Fwww.tilakmandirwala.com%2Fproducts%2Fmakrana-white-marble-laddu-gopal-jhula-inlay-16in - Tell us the size, the stone and where it is going. We will send you a quote and a timeline. ## Contact Tilak Mandirwala - Email: info@tilakmandirwala.com - Phone: +91 92141 72150 - WhatsApp: https://wa.me/919766532408 - Enquiry form: https://www.tilakmandirwala.com/contact - Store: Jaipur, Rajasthan, India — https://www.tilakmandirwala.com/best-mandir-shop-jaipur Enquiries are quoted per piece: share the deity or object, an approximate height, and the stone you have in mind.