# Makrana White Marble Shankheshwar Parshvanath Murti, 21in > Sculptor-carved Makrana white marble Shankheshwar Parshvanath: a 21-inch derasar murti under a seven-hooded naga canopy. **Source:** https://www.tilakmandirwala.com/products/makrana-white-marble-shankheshwar-parshvanath-murti-21in **Business:** Tilak Mandirwala — made-to-order marble temples (mandirs), statues and decorative handicrafts. Jaipur, Rajasthan, India. Founded 2006. **How it works:** Each piece is carved to order by the independent master sculptors TMW works with in Jaipur's Khajane Walon Ka Rasta sculptors' market. TMW designs the piece with the customer, briefs the sculptor, and follows it through to delivery and installation. **Pricing:** request-for-quote — pieces are custom, so the site carries no list prices. **Ships:** across India; export enquiries welcome. **About the image:** a design visualisation, not a photograph of stock on hand. The piece is carved to order after the design is agreed. **Availability:** made to order. ## Why Makrana marble suits a Jina Makrana marble is quarried in the Nagaur district of Rajasthan, a few hours north-west of the Jaipur workshop that carves this piece. It is the same calcite-rich stone that faces the Taj Mahal, and what recommends it for a murti is ordinary physics rather than reputation: it is dense, very low in porosity and almost free of iron, so daily abhishek, kesar and dhoop do not stain it and it does not yellow the way a softer, more absorbent white stone will. Light enters the surface a millimetre or two before it comes back, which is why a Jina's face carved in Makrana holds a soft inner glow under a single ghee lamp instead of going flat and chalky. It also holds a crisp arris, which matters on a form built from fine edges such as snake scales, pleats and the srivatsa. ## The seven-hooded form of Parshvanath Parshvanath is the twenty-third Tirthankar, and the serpent canopy above his head is what names him on sight. Jain tradition tells of the naga Dharanendra and his consort Padmavati rising to shelter Parshvanath from a storm sent to break his meditation, and the carved hoods, seven of them fanned in an arc, record that moment. His lanchhana, the emblem that identifies which of the twenty-four a murti depicts, is the snake, cut here into the face of the pedestal. The Shankheshwar form takes its name from the tirth at Shankheshwar in Patan district, Gujarat, one of the most-visited Parshvanath pilgrimage places in western India, and it is the form most often asked for as the mulnayak of a Shvetambar home derasar. ## What the carving says Everything on this murti follows Shvetambar Murtipujak convention, and none of it is decorative licence. He sits in padmasana with both palms stacked flat and open in the lap, right over left, in dhyana. The srivatsa is cut on the chest and the gaze is set to the nose-tip (nasagradrishti, the mark of attention turned inward), while the eyes themselves are carved open and prominent, the chakshus convention that lets a devotee stand before a living Tirthankar. A kandora waistband sits above the pleated kachota, kundals hang at the elongated earlobes, and the serpent's coils are worked into the back and sides of the seat so the canopy reads as one continuous body. A Tirthankar murti is iconographically fixed; getting it right is the whole job. ## How it is carved A squared block is roughed down to the seated silhouette first, then the stepped pedestal and the coiled seat are blocked in, and only after that does the detail work start. The naga canopy is the difficult part: seven hoods carved from the same block as the head, undercut so daylight passes behind them without leaving the stone thin enough to chip. The face, the stacked palms, the kandora and the scale work on the hoods are cut entirely by hand; no machine finishing touches them. The surface is then brought up through progressively finer abrasives to a soft satin polish that reads warm and matte-bright rather than glassy, so lamplight sits on the form instead of glaring off it. ## Placing a 21-inch mulnayak Twenty-one inches is the step above a small home murti and below a community-derasar scale. It works as the presiding murti of a ghar-mandir or a dedicated pooja room, seen from four or five feet away, at which distance the hoods, the srivatsa and the snake on the pedestal all stay legible. Allow roughly two feet of clear width and about a foot of depth, plus room in front for a thali. A plain pale wall or a simple wooden ghar-mandir behind it serves the stone better than a patterned backdrop. The same form can be commissioned taller for a derasar, cut in black stone or Vietnam white, or given a full parikar with a toran arch and attendant figures. Some pieces are already carved and can be photographed for you before dispatch, with no carving wait; a fresh commission runs eight to twelve weeks from the day the drawing is approved. ## Specifications - **Material:** Makrana White Marble - **Finish:** Soft polish (satin) - **Colour:** White - **Height:** 21 inches - **Width:** 12 inches - **Depth:** 10 inches - **Weight:** 45 kg - **Ideal for:** Home derasar, Community derasar Stone, size and finish are all changeable — these are the specifications of the piece as shown. ## Media ### Images (1) - https://vptrobfqdvauunfvodxw.supabase.co/storage/v1/object/public/tmw-media-assets/Statue%20product%20images/makrana-white-marble-shankheshwar-parshvanath-murti-21in.webp (primary, concept render) All media is public and CORS-open — fetch directly, no signing or proxy needed. ## Part of - [Statues](https://www.tilakmandirwala.com/collections/custom-marble-statues) ## Related pieces - [Makrana White Marble Ajitnath Bhagwan Murti, 21in](https://www.tilakmandirwala.com/products/makrana-white-marble-ajitnath-bhagwan-murti-21in) - [Makrana White Marble Mallinath Murti, 15in](https://www.tilakmandirwala.com/products/makrana-white-marble-mallinath-murti-15in) - [Makrana White Marble Mahavir Swami Murti, 15in](https://www.tilakmandirwala.com/products/makrana-white-marble-mahavir-swami-murti-15in) ## Enquire about this piece - WhatsApp, message pre-written: https://api.whatsapp.com/send?phone=919766532408&text=Hi!%20I'd%20like%20a%20quote%20to%20have%20this%20design%20made%3A%20Makrana%20White%20Marble%20Shankheshwar%20Parshvanath%20Murti%2C%2021in.%20Product%20link%3A%20https%3A%2F%2Fwww.tilakmandirwala.com%2Fproducts%2Fmakrana-white-marble-shankheshwar-parshvanath-murti-21in - Tell us the size, the stone and where it is going. We will send you a quote and a timeline. ## Contact Tilak Mandirwala - Email: info@tilakmandirwala.com - Phone: +91 92141 72150 - WhatsApp: https://wa.me/919766532408 - Enquiry form: https://www.tilakmandirwala.com/contact - Store: Jaipur, Rajasthan, India — https://www.tilakmandirwala.com/best-mandir-shop-jaipur Enquiries are quoted per piece: share the deity or object, an approximate height, and the stone you have in mind.